RS Infra

Diameter: 200 mm (Nominal Bore)

Class: NP2 (Non-Pressure Class 2 – suitable for light-duty applications with lower load-bearing requirements)

Material:

• Manufactured from Reinforced Cement Concrete (RCC)

• High-strength cement, aggregates, and mild steel reinforcement

• Spun-cast process used for uniform strength and durability

Joint Type:

• Socket & Spigot (Tongue and Groove) joint system

• Can be sealed with cement mortar or rubber gasket (depending on application)

Length:

• Typically 2 to 2.5 meters per pipe (length may vary by manufacturer)

Diameter: 300 mm (Nominal Bore)

Class: NP2 (Non-Pressure Class 2 – suitable for light-duty, shallow-buried installations)

Material:

• Made from Reinforced Cement Concrete (RCC)

• Contains high-quality cement, aggregates, and mild steel reinforcement

• Manufactured using the spun (centrifugal) casting process for uniform density

Joint Type:

• Socket & Spigot (Tongue and Groove) joint

• Can be sealed with cement mortar or rubber ring, based on application

Length:

• Standard: 2 to 2.5 meters per pipe (varies slightly by supplier)

Diameter: 250 mm (Nominal Bore)

Class: NP2 (Non-Pressure Class 2 – designed for light-duty applications)

Material:

• Made from Reinforced Cement Concrete (RCC)

• High-quality cement, fine aggregates, and steel reinforcement

• Spun-cast manufacturing process for uniform density and strength

Joint Type:

• Socket & Spigot (Tongue and Groove) joint

• Sealed with either cement mortar or rubber gasket (if rubber ring-compatible)

Length:

• Standard: 2 to 2.5 meters per pipe (can vary slightly depending on manufacturer)

Diameter: 350 mm (Nominal Bore)

Class: NP2 (Non-Pressure Class 2 – light-duty applications)

Material:

• Made from Reinforced Cement Concrete (RCC)

• Manufactured using high-quality cement, sand, aggregates, and mild steel reinforcement

• Spun cast (centrifugally cast) for uniform compaction

Joint Type:

• Socket & Spigot (Tongue and Groove) joint

• Typically sealed with cement mortar or rubber ring (if rubber gasket-compatible)

Length:

• Standard length: 2 to 2.5 meters per pipe (may vary slightly by manufacturer)

Diameter: 150 mm (Nominal Bore)

Class: NP2 (Non-Pressure Class 2 – ideal for light-duty, non-pressurized applications)

Material:
Made from Reinforced Cement Concrete (RCC)

• High-strength cement, aggregates, and mild steel reinforcement

• Manufactured using the spun-casting process, providing uniform density and strength

Joint Type:

• Socket & Spigot (Tongue and Groove) joint system

• Sealed with either cement mortar or rubber gaskets (depending on design requirements)

Length:

• Standard length: 2 to 2.5 meters per pipe (may vary slightly depending on the manufacturer)